Mechforce Professional Grade Heavy Duty Barrel Vise

Now: $99.95
(You save )
(20 reviews) Write a Review


Package Included:

(1X) Mechforce – Professional Grade Heavy Duty Barrel Vise


  • Including four pieces of raw Cowhide, special treated to increase the static friction coefficient to μ = 0.9 as well as protecting the barrel from scratched up


  • Chamfered clamp groove design to reduce the surface contact stress to the barrel, protecting the barrel from dents


  • Heavy duty components designed to last; ¾” thick aircraft grade high strength aluminum bodies, high strength grade 8 studs, heavy duty flange nuts, super tough raw cowhides



Don’t want to damage the barrel surface while gunsmithing? This product is right for you. Featuring a heavy duty design and cowhide inserts, this professional grade barrel vise from Mechforce is capable of torque or untorque barrels and muzzle devices without damaging the surface of the barrel.



Designed for barrel Outside Diameter from 0.67” to 1.375”

Dimensions: 7.25”L x 2.75”W x 3.25” H

Weight: 2 LB 7 OZ


Additional Details


20 Reviews

  • 5
    I was totally impressed with this tool

    Published by Edward Keller on Jul 10th 2020

    The first pair of Cowhide inserts lasted thru the removal and replacement of 6 Enfield No.1 Mk.4 Barrels. I was amazed. Other barrel vises, that I own, cost much more and didn't function nearly as well as this. I am amazed.

  • 5
    Very simple and very functional

    Published by William Harvey on Jun 26th 2020

    I had a muzzle brake I needed to put on a gun. Instead of putting the barrel in a vice and having the weight of the gun hanging I laid my gun on the work bench to see how much the barrel was off the bench and how close it was to the vice. I ended up loosely clamping the vice to the end of the barrel and there was no visible gaps under the vice so I used C clamps to clamp it to the work bench, tightened the screws down and put my muzzle brake on. It saved me time, gas and cost of taking it to someone to do it for me and having to work out supporting the heavy end of my rifle in a vice that wasn't even mounted. The design was great, very simple and easy to use. I'm moving to Alaska and it's going with me and it's made in the USA. F China and their garbage

  • 5
    Finally... the right tool for the job!

    Published by Kevin S on Jun 14th 2019

    I had a factory muzzle device that was really stuck on good (not welded or anything). I tried a few other vices and devices but nothing would work. I finally came across this and it worked like a dream, I had that stuck on muzzle device off in a couple of minutes. This is a great product as it will work on lots of weapon systems like gas guns, bolt guns, different barrel diameters, etc. Very handy to have in the shop and I would highly recommend it.

  • 5

    Published by R Vez on Nov 16th 2018

    Built to last a lifetime. Very heavy duty. Works perfect for the installation of devices on my AR's and Rem 700 SPS bolt guns. Easy to set up and put away. Better than using a bench vise that's fer sher...

  • 5
    Amazing build quality

    Published by Jason on Nov 16th 2018

    Amazing build quality. Was able to torque the flash hider on my new AR build without leaving a trace on the barrel surface.

Related Products

Customers Also Viewed