Description
The FW3A was designed by Fritz15 and the flashlight forums TLF & BLF and brought to life by Lumintop.
SPECIFICATIONS:
Emitter: Triple LEDs on copper-based PCB
Two color/brightness options are available. Please choose one from the menu:
- Cree XP-L HI 3D (NW 5000K)
- Nichia 219C 4000K
Optic: TIR optics, frosted
Lens: Glass with anti-reflective coating
Flux: 2800 lm (XP-L Hi), 1600 lm (Nichia)
Firmware:
The FW3A uses free software called Andúril, distributed under the terms of the GPL v3. Code is available from http://tiny.cc/TKAnduril
User interfaces:
By default, the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.
A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
The MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power.
MUGGLE mode uses a reduced output.
It has an electronic LOCKOUT for safety but acts also as momentary low light.
Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm
Battery:
One Efest 18650 IMR 3500mAh Rechargeable Battery is included.
Driver: FET+7+1 driver. Low parasitic drain while OFF
Body: Aluminum with hard-coat anodizing
Switch: Electronic tail switch
Ingress rating: Equivalent to IPX7
Weight: Approximately 53 g without cells
Size: 25.5 mm Ø head x 92.5 mm length.
FW3A Useful Information:
http://budgetlightforum.com/node/67058
Additional Details
- SKU:
- FW3A